Skip to content

The 10 Best Rebar Bender In 2022

There is a vast market for rebar bender, and you will likely have to screen through a lot of similar products. To make the decision about which one to buy, it can be challenging as you have to screen through so many options. However, our team has compiled a list of 10 popular and top rated best rebar bender that you can consider if you want to buy one. These resources will not only do you good but will save you money as well.

A Shortlist Of The Best Rebar Bender

Here is a quick recap of our top 10 picks that lets you compare each phone with another and allow you to choose the best one.

Top 10 Best Rebar Bender You Should Go For In 2022

SaleBestseller No. 1
Crescent H.K. Porter 3/8" (#3) and 1/2" (#4) Extendable Indexing Rebar Bender, RB4, Red/Black
  • Dual use head allows bending for both 3/8 Inch and 1/2 Inch rebar (No3 and No4)
  • Pushbutton extends bender to 35 Inch for maximum leverage; collapses to just 21 Inch for convenient storage and portability
  • 14 position indexing head adjusts with center pushbutton to allow total access for maximum leverage
  • Extra sturdy steel handles for the toughest conditions
  • Super strong indexing head grips rebar securely for accurate bends
Bestseller No. 2
VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V
  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands.
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent.
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing.
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position.
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Bestseller No. 3
Anbull 900W Electric Rebar Bender,Hydraulic Rebar Bending Maching Bending up to 5/8 Inch #5 16mm Rebar, Bending Angle 0-130 Degrees, Rebar Bending Machine with Positioning Bolt
  • 【No Metal Case】💪This rebar cutter is the same model as Anbull RB-16 rebar cutter, just without metal case.
  • 【Pure Copper Coil Motor】 Bending rebar up to 5/8”(#5)16mm from 0-130 degrees within seconds, which satisfies your various bending demand and raise your working efficiency greatly.
  • 【One Button Operation】 Ergonomic back grip design of our electric rebar bender facilitates maneuverability and ease of use and safety. Simply Keeping the switch pressed, the bending block starts to push forward.
  • 【Hydraulic-powered Piston】Our hydraulic rebar bender features strong thrust with less power consumption and low noise to extend the service life. When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block will reset.
  • 【Detachable Positioning Bolt】 There is a detachable positioning bolt designed for starter, marking at the positioning bolt when bending for the first time at the positioning bolt, so that you could bend the rebar to the same angle next time.
Bestseller No. 4
Metabo HPT Rebar Bender and Cutter | Electric | Up to #5 Grade 60 Rebar (3/8", 1/2", 5/8") | Variable Speed Trigger | Lightweight and Portable | 5-Year Warranty | VB16Y
  • Rebar bender and cutter
  • MOTOR: 8-Amp motor with intense power (530W)
  • TRIGGER: Variable speed trigger with safety lock provides manual-like precision and control over the bending speed
  • APPLICATIONS: Uniformly bends up to no. 5 (3/8", 1/2", 5/8") grade 60 rebar at a maximum angle of 180 degrees
  • FAST BENDS: Precision angle bends are preset and completed in just seconds (cut: 3. 1 seconds, bend: 5. 1 seconds) for consistency
Bestseller No. 5
Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope
  • Pure Copper Motor: A pure copper motor ensures higher reliability and excellent motivation yet low noise. Moreover, it is more durable with less power consumption and low noise to extend the service life.
  • Excellent Performance: This portable rebar bender bending rebar up to 5/8'' (#5) grade 60 from 0-130 degrees within 5 seconds. It satisfies your various bending demand and raises your working efficiency significantly.
  • Solid Machine Body: Study and durable machine body and head can stand super-hard rebar with strong clamping force, which can help to reduce the waste of steel rebar. Multiple screws fixed on the head enforce the security.
  • Detachable Positioning Bolt: The Rebar Bender with adjustable positioning bolt allows you to accurately bend any angle within 0-130 degrees, preset angle for repeating the same angle bend.
  • Humanized Design: This portable automatic rebar bender features an ergonomic back grip design with two handles that facilitate maneuverability, ease of use, and security. Simply Keeping the switch pressed, the bending block starts to push forward.
Bestseller No. 6
Anbull 1200W Electric Rebar Bender,Hydraulic Rebar Bending Machine Bending up to 7/8 Inch #7 22mm Rebar, Rebar Bending Angle 90 Degrees or Greater
  • 【Powerful 1200W Pure Copper Motor】With the electric hydraulic-powered motor and piston, Anbull rebar bender makes each bend both fast and efficient , and it also features strong thrust with less power consumption and lower noise.
  • 【Great Bending and Straightening Capacity 】Anbull RB22 concrect rebar bender has powerfull push and pull capabilities which allows bending or straightening 7/8" 22mm rebar to 90° or greater within 5 seconds, satisfying your various manufacturing needs. (Note: The rebar straightening head is not included in the Rebar Bender and needs to be purchased separately. Please refer to ASIN: B097MHZYJP)
  • 【Three-point Bending】The electric rebar bending machine Designed with a piston that moves forward forming a three-point bending system for the rebar bending head, the bending can be made fast and efficient.
  • 【One Button Operation】With its compact and portable design, it can be easily carried by one person for effective on site construction, and it runs on the standard 110V outlet, perfect for all rebar projects both at workplace and on the job site.
  • 【Precision Quench Technology】 Equipped with a pressure relief valve to release the power after bending, our electric hydraulic rebar bender comes with a bending block quenched with precision steel casting technology.
Bestseller No. 8
BN Products MBC-16B 1 Manual Bender/Cutter, Orange
  • Longer handle and cam mechanism provides greater leverage when cutting and bending grade 60 rebar
  • Adjustable 2-1/2" diameter bending roller
  • Replaceable cutting jaws have two open slots with innovative shaped blades to prevent chipping of the jaws
  • Other features include a 12" long no-slip handle grip and a lifting chain to make it easier to carry
  • Other features include a 12" long no-slip handle grip and a lifting chain to make it easier to carry
Bestseller No. 9
Crescent H.K. Porter Rebar Cutter and Bender - 0590RBJN
  • Mounts easily on most flat surfaces
  • Cuts and bends
  • Shear-cut blades
  • Rugged contractor's tool
  • Shear-cut blades
Bestseller No. 10
Hitachi VB16Y Portable Variable Speed Rebar Cutter Bender, Up to Number 5 (3/8", 1/2", 5/8") Grade 60 Rebar, 3.1 Second Cut, 8.0 Amp (Discontinued by the Manufacturer)
  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
  • 8 Amp motor, intense power (530W) that it uniformly bends up to No. 5 (3/8", 1/2", 5/8") Grade 60 rebar at a maximum angle of 180 degrees
  • Variable speed trigger with safety lock provides manual-like precision and control over the bending speed
  • Reference markings on bending plate provide for easy position adjustment
  • Precision angle bends are preset and completed in just seconds (cut: 3.1 seconds, bend: 5.1 seconds) for consistency

What To Look For Choosing The Best Rebar Bender

Before choosing a rebar bender, you should take the following considerations into account.

The first step is to determine what your needs are. Once you know what you need, it’s time to start finding the right product.

The type of product you wish to buy is the second thing to think about. Do you prefer a product that is simple to use or one that is more complicated? Are you looking for something tiny or something big? When it comes to picking the best product for your needs, these are all vital factors to consider.

In today’s competitive world, it’s important to find the right product for your needs. This guide will help you do just that. You’ll learn about what to look for and how to choose the best product for you.

When considering a product, it’s critical to consider the pricing and compare it to other alternatives. Do you want to spend a lot of money on a product that won’t work, or would you rather save money and acquire a better, more effective product?

Final Thoughts

On the basis of these criteria, we chose our rebar bender. Is this the last step in our procedure? No way. The most crucial thing you should know about us is that we constantly update our website to ensure that you have access to up-to-date and relevant information. We have a last layer of filtration because reader pleasure is paramount to us. And you, the reader, are part of that group. And you, the reader, are one of them! Please let us know if any of the rebar bender listed here are incorrect, irrelevant, not up to date, or simply old. Your suggestions are always appreciated, and we’ll do our best to update our list as soon as possible.

Leave a Reply

Your email address will not be published.