Skip to content

How To Add Pockets To Basketball Shorts

Adding pockets to basketball shorts is a simple way to improve their functionality. Pockets can be added to the waistband, side seams, or front of the shorts. The pockets can be made from a variety of materials, including fabric, vinyl, or leather. The steps for adding pockets to basketball shorts are: 1. Decide where you want the pockets to be located. 2. Cut two pieces of fabric or other material to size. 3. Sew the

How To Add Pockets To Basketball Shorts

Adding pockets to basketball shorts is a relatively simple process that can be accomplished with a sewing machine. First, cut two pieces of fabric that are the same size as the pockets you want to add. Then, fold the fabric in half so that the right sides are facing each other and sew along three of the four sides, leaving one side open. Turn the pocket inside out and press it flat. Finally, sew the pocket onto the basketball shorts, making sure to match up the seams.

Some basic sewing supplies are needed to add pockets to basketball shorts. A sewing machine, thread, scissors, and pins are a few of the essentials. It is also helpful to have a seam ripper in case of any mistakes.

  • Cut fabric to desired length and width
  • Fold over fabric 1″ on the top and bottom of fabric
  • Sew along the top and bottom of fabric, making sure to back stitch at the beginning and end turn

-What kind of pocket? -Where to put the pocket? -How to sew the pocket?


Frequently Asked Questions

How Do You Sew A Pocket On A Pair Of Shorts?

To sew a pocket on a pair of shorts, you will need to measure the desired location for the pocket and then mark the fabric. You will also need to cut out a piece of fabric for the pocket. The pocket fabric should be twice as wide as the pocket opening and about 3-4 inches tall. Then, sew the top edge of the pocket to the shorts, making sure to backstitch at both ends. Finally, sew the bottom edge of the pocket to the shorts.

How Do You Add Pockets To Already Made Shorts?

There are a few ways to add pockets to already made shorts. The easiest way is to use bias tape. Cut two pieces of bias tape, the same length as the sides of the pocket. Sew one piece of bias tape to the inside of each side of the pocket. Then, sew the pocket to the shorts. Another way to add pockets is to use a seam ripper to open up the existing seam on the shorts and add a pocket piece. Finally, you can also add a patch pocket to the front or back of the shorts.

How Do You Add Pockets To Clothes?

There are various ways to add pockets to clothes. One way is to use a purchased pocket or pockets that have been added to the pattern of the garment. Another way is to add a pocket using bias tape or other fabric strips.


To Review

There are a few ways to add pockets to basketball shorts. One is to cut out a section of the fabric and sew on a pocket, or use Velcro to attach a pocket. Another option is to buy basketball shorts with pockets already built in.

Leave a Reply

Your email address will not be published.